|
Installing an outdoor sound pool system can become a daunting task unless you come up with the right equipment that will make things a lot easier. But first, you will have to purchase the right outdoor sound system for your swimming pool – go for a sound system that is designed to be moisture and rain resistant.
When it comes to installing a sound system for your swimming pool, you will have to start by choosing the right type of outdoor speakers. For instance, you should go for outdoor speakers that can enable you to listen to perfect sounds while swimming. Make sure that you choose quality outdoor speakers that are totally water tight.
2.4GHz Wireless Indoor/Outdoor Speaker with Wireless Sender/Receiver by RocketFish
Also, they must be protected from a wide range of possible leakages. From here, you will have to choose and install the proper type of wiring in order to have your outdoor sound system included. Go for heavily insulated wires because such wires are totally protected when it comes to weather conditions and other hazards. Additionally, you will have to make sure that these wires come with a CL3 rating in order to guarantee the fact that they will not produce enough heat to start a fire when installed in a wall or placed on the ground.
The whole problem related to wires can be avoided by using a wireless system that is specially designed to operate by using batteries and radio signals. With such a wireless outdoor sound system, the only thing that you will have to do is to hook it up in your swimming pool area right to the transmitter. Once the signal goes to the outdoor speakers, you can listen to virtually anything you like.
2.4GHz Wireless In/Outdoor Speaker by Audio Unlimited
However, you will have to change the batteries that enable the speaker to function and you will have to do this from time to time. But, in case that you decide to use a wireless sound system for your swimming pool area, you will not have to worry about wires and possible accidents anymore. Here are some tips for you to follow in order to install an outdoor sound system for your swimming pool area.
- First, you will have to a purchase an outdoor sound system that comes with weather resistant speakers. Also, the system you decide to purchase must be tested in order to prove that it can stand up to harsher weather conditions.
- Next, you will have to determine the exact location where you want to have your outdoor speakers mounted. Make sure that you choose locations that are fully protected and covered. Running some durable speaker wires is the next thing you will have to do – if possible, you should make sure that these wires are run along an inconspicuous area or through the wall.
- Next, you will have to mount the necessary volume control box – mount it to the exterior in order to avoid having to go inside your house all the time in order to adjust the volume. The speaker wire will have to be run right through this volume box and through each of your outdoor speakers. Testing your speakers in your swimming pool area is what comes next in order to make sure you are going to get the sound you want. Adjust each of your outdoor speaker locations in order to fill the possible sound voids.
- Next, you will have to drill the necessary pilot holes in order to attach your outdoor speakers to the chosen locations – attach them to the mounting brackets and secure all the speaker wires to the wall or floors in order to prevent them from being pulled. Also, you will have to caulk all holes around your volume control box and its wiring in order to prevent any moisture buildup.
6.5 in. 125-Watt 2-Way Indoor/Outdoor Weather-Resistant Speaker System by NXG
|